Moist Metal Grip – Oak Linings

Moist Metal Grip is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. Moist Metal Grip was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood.

Features

Wet Rusted Surface application

No shutdown required

No blasting required

Lower project costs

Quicker return to service

Typical Uses

As a one-coating system for metal that is moist or in high humidity.

As a one-coating system to encapsulate existing rusted surfaces.

As a one-coating system to protect metal with condensation issues.

As a one-coating system to line tanks.

Very good acid and good alkali resistance

As a primer before Enamo Grip or Lining Kote is applied.

Application Methods

Omega Fire can be applied to metal, concrete, masonry, and composite surfaces. The application can be by spray or by trowel. For specific instructions on surface preparation, mixing and application, please refer to the SPI Application Instruction sheet.

NOTE: A prescribed thickness is required for specific temperature and duration of protection.

Download Info

Visit Website

Features

Typical Uses

Product Chemistry

Polyurethane