Oil & Gas (Onshore & Offshore)

At OAK linings we offer innovative coating protection products and technologies that support the OIL and Gas Industry. Be it Offshore assets, Midstream, or Downstream, we have the perfect solution to address the industry’s coating challenges.

We have partnered with suppliers, who have decades of research, experience in materials science, and protective coating technologies that address challenges faced by oil and gas companies. These innovative solutions help protect assets and extend the asset’s life span.
Besides the traditional polymer barrier coating, our patented products can prevent corrosion permanently or protect assets for more than 20 years. This is a huge saving in maintenance costs for the capital-intensive and demanding sectors such as the oil and gas sector.

Our products are used to protect structures on Oil Drilling rigs, Oil production platforms, Storage Tank facilities, Boilers,

Refineries, pipelines, etc.
Our range of anti-corrosion, chemical-resistant, and abrasive-resistant protective coatings, heat blocking (insulation) coating, and fireproofing coatings are the most suitable solutions to provide durable and cost-effective protection for assets in the oil and Gas sector.

In the downstream sector, our stratification and lining solutions give old tanks a new lease of life by providing a new interior coating that guarantees a leakproof system for at least 30 years. We provide double skin lining solutions for Above ground and Underground Storage Tanks with vacuum monitors for tank pressure, product leakage, temperature change, etc.

Flagship and recommended products.

A chemically bonded phosphate ceramic, EONCOAT provides two layers of protection to permanently prevent carbon steel from corroding. These 2 layers of protection come with one coat. EONCOAT’s technology is a fundamentally different approach to corrosion resistance. This technology requires none of the toxic or flammable materials used by polymer coatings. There are no VOCs to contend with. NASA found it to be the most effective coating they ever tested, and they tested it when looking for an environmentally friendly product. EONCOAT is Corrosion-Proof, Abrasion-Resistant, Chemical-Resistant, Fire-Proof, Anti-Microbial

RUST GRIP® is a liquid reinforcement coating designed to seal air, moisture, and chemicals out of surfaces completely. It seals virtually any surface to protect it against corrosion, weather, and physical wear. Additionally, RUST GRIP® is an encapsulating coating that stands up to abrasion, direct impact, acids, salts, and caustic materials with no loss of strength. RUST GRIP® has been successfully tried & tested worldwide and has received numerous certificates to substantiate its effectiveness and reliability.

Lining Kote UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments. Lining Kote UHS has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity, and high heat. Lining Kote UHS is made with a high molecular weight base and cure for strength and durability.

HPC Coating is designed to control heat transfer on surface temperatures up to 482°F (250°C). It is water-borne and extremely lightweight in appearance. HPC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HPC® Coating offers a “Green”, non-flammable, non-toxic formula for high heat surface applications over standard steam pipe or oven wall construction. HPC® Coating is easily applied using a texture sprayer and can be applied over metal, concrete, wood, and other substrates.

A two-part hybrid silicone/solvent resin (Part B is flammable) and (Part A is water-based resins) using specific ceramic compound loads for application directly over surface temps of 250°C (482°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to the ambient. After Part A and Part B are blended together, HPC®-HT Coating offers a ‘green’, non-flammable, non-toxic formula for high-heat surface applications. HPC®-HT is easily applied and can be sprayed directly on metal, concrete, and other high-temperature surfaces up to 600°C.

At OAK linings we offer innovative coating protection products and technologies that support the OIL and Gas Industry. Be it Offshore assets, Midstream, or Downstream, we have the perfect solution to address the industry’s coating challenges.

Flagship and recommended products.

EONCOAT

RUSTGRIP

Lining Kote UHS

HPC

HPC-HT