A chemically bonded phosphate ceramic, EONCOAT provides two layers of protection to permanently prevent carbon steel from corroding. These 2 layers of protection come with one coat. EONCOAT’s technology is a fundamentally different approach to corrosion resistance. This technology requires none of the toxic or flammable materials used by polymer coatings. There are no VOCs to contend with. NASA found it to be the most effective coating they ever tested, and they tested it when looking for an environmentally friendly product. EONCOAT is Corrosion-Proof, Abrasion-Resistant, Chemical-Resistant, Fire-Proof, Anti-Microbial

RUST GRIP® is a liquid reinforcement coating designed to seal air, moisture, and chemicals out of surfaces completely. It seals virtually any surface to protect it against corrosion, weather, and physical wear. RUST GRIP® acts as a primer, intermediate, and topcoat with a single application and minimal surface preparation as a three-coats-in-one system. Additionally, RUST GRIP® is an encapsulating coating that stands up to abrasion, direct impact, acids, salts, and caustic materials with no loss of strength. RUST GRIP® has been successfully tried & tested worldwide and has received numerous certificates to substantiate its effectiveness and reliability. HPC Coating is designed to control heat transfer on surface temperatures up to 482°F (250°C). It is water-borne and extremely lightweight in appearance. HPC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HPC® Coating offers a “Green”, non-flammable, non-toxic formula for high heat surface applications over standard steam pipe or oven wall construction. HPC® Coating is easily applied using a texture sprayer and can be applied over metal, concrete, wood, and other substrates.

Lining Kote UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments. Lining Kote UHS has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity, and high heat. Lining Kote UHS is made with a high molecular weight base and cure for strength and durability.

A two-part hybrid silicone/solvent resin (Part B is flammable) and (Part A is water-based resins) using specific ceramic compound loads for application directly over surface temps of 250°C (482°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to the ambient. After Part A and Part B are blended together, HPC®-HT Coating offers a ‘green’, non-flammable, non-toxic formula for high-heat surface applications. HPC®-HT is easily applied and can be sprayed directly on metal, concrete, and other high-temperature surfaces up to 600°C.